Saturday, February 15, 2020

Don't Drive The Plants!!


Today, Aémisdaud and Amy did some driving practice using their newly installed grabber to practice the eco-disaster challenge.


However, they had an unexpected visitor...


They are going to attempt this challenge remote-controlled so they felt it was important Amy had some practice using the grabber tool. The green barrels should be picked up and put into the blue section and the red barrels should be put in the yellow section. You can read more about the rules for this challenge here.


However, the had trouble picking fallen-over barrels up due to the grabber being too high. Ameezdhad intended for Amy to be able to do so so this may be a problem. Look forward to a follow-up post sometime later this weekend detailing a redesign of the grabber. :)



Now that both Amy and Mia are more accustomed to the robot, progress should skyrocket! 




Thursday, February 6, 2020

Active cooling


With a Pi4 in the middle of Audrey III and 4 heavy-duty motors, things might get a bit hot so we have fitted a fan to the top layer. This will pull hot air out and the holes in the back and side will allow some airflow over the boards.

The Pi was running at around 68 degrees and with the fan about 55 depending on what it's doing so we should not have any overheating, the Pi starts to throttle at 80C so better safe than sorry. This is especially true when you are trying to eek out as many frames per second as you can for the line following.

Here's a couple of pictures with a cutaway of the internals.



You may be wondering about the crudely cut fan hole in the top; The top layer is now being reprinted after testing with the hacked version.



Sunday, January 26, 2020

More claw.....

We have finally got around to attaching the claw to the front of the robot, (now officially known as Audrey III) and updated the software to activate it with the controller.




New grippers were 3d printed to grip the barrels a little better and the claw mounted low enough to be able to grab a barrel even if its has fallen over.


Why Audrey III? Here is a clue from 1983...



Sunday, January 19, 2020

Finished Icons!

Now that Amy's PREs are finished, she has had time to finish the last few icons! There have even been a couple changes to the few icons that she originally featured in this post!


She's made: icons for the challenges the team are hoping to complete autonomously,


 As well as, an icon for the remote-controlled challenges,



an icon for exiting the menu and an icon for shutting down the program!


Hopefully, they are an improvement from last year's icons!



Saturday, December 28, 2019

Tinkercad Triumphs

 Some more information regarding the 3D printed parts featured in yesterday's blog.


These are the threaded inserts Eymeythdahd was putting together yesterday. He and Amy have been designing this and other models for their robot on Tinkercad.


In other news, their motion compass has also arrived!


Here's some footage of it up and running:



Friday, December 27, 2019

Happy New Year!

Now that school shows and Christmas are finished, Amy and Emisdud have more time to work on their entry and the blog!

Amy has started work on more menu item illustrations:


A starting screen


And a screen alerting the user that the joystick hasn't paired.

Today, Ámeizdoad put together some of the parts of the robot he had earlier 3D printed.



They also worked on the code for the menu using Thonny.